Key Features

• Type: OEM cylinder seal kit
• Compatibility: model stated in title
• Contents: rod seal ; piston seal ; gland wiper ; O rings
• Benefit: improved holding and reduced external leakage
• Use: maintenance overhaul of cylinders

Key Features

• Type: OEM cylinder seal kit
• Compatibility: model stated in title
• Contents: rod seal ; piston seal ; gland wiper ; O rings
• Benefit: improved holding and reduced external leakage
• Use: maintenance overhaul of cylinders

Key Features

• Type: OEM cylinder seal kit
• Compatibility: model stated in title
• Contents: rod seal ; piston seal ; gland wiper ; O rings
• Benefit: improved holding and reduced external leakage
• Use: maintenance overhaul of cylinders

Key Features

• Type: OEM rotator seal kit
• Compatibility: model stated in title
• Contents: rod seals ; piston seals ; O rings ; wear rings
• Media: mineral hydraulic oil service
• Use: restore leak tightness and rotational performance

Key Features

• Compatibility: Hydra Part HP-30C Group 3 aluminium gear pumps
• Intended use: service kit for shaft and static seals on Group 3 pump body
• Typical kit contents: front lip seal ; cover o rings and body seals for Group 3 construction
• Reference performance: Group 3 pumps in range typically used at higher flows and pressures
• Applications: PTO driven systems ; industrial power units requiring larger displacements
• Fitment check: confirm HP-30C family before ordering to ensure correct diameters

Key Features

• Compatibility: Hydra Part Group 2 tandem pumps using front code 067 ; rear code 066 interfaces
• Intended use: renew the sealing set when splitting tandem sections or replacing shaft seal
• Typical kit contents: shaft seal ; o rings ; interface seals used between tandem pump sections
• Notes on assembly: ensure rear shaft selection matches torque from front section during build
• Applications: tandem pumps on tippers ; loaders ; auxiliary hydraulic circuits
• Variant note: front 067 ; rear 066 code covers common Group 2 tandem configurations

Key Features

• Compatibility: Hydra Part HP-10C Group 1 gear pumps
• Intended use: renew shaft and static seals during Group 1 pump overhaul
• Typical kit contents: front shaft oil seal ; body o rings ; gasket elements for Group 1 casing
• Pump family: light duty aluminium gear pumps used widely on compact hydraulics
• Service note: check for shaft play ; replace bearings if excessive to protect new seal
• Applications: power packs ; small mobile circuits ; low to mid power implements

Key Features

• Compatibility: Intermercato RMR6C rigid rotator
• Machine class: excavators up to 6 ton ; rigid mount G rotor design
• Intended use: replacement of OEM sealing elements to correct leaks and maintain pressure
• Typical kit contents: rotor shaft seals ; housing seals ; port seals for RMR6C architecture
• Applications: sorting grabs ; clamshell buckets ; forestry handling on 5 ; 6T carriers
• Fitment note: confirm model plate RMR6C before ordering to avoid mismatch

Key Features

• Compatibility: Hydra Part sectional control valves nominal 50 L/min class ; one spool section
• Intended use: repack a single working section to cure external leaks and spool drag
• Typical kit contents: spool o rings ; end cap seals ; dust seals used on 50L sections
• Valve family: 3/8 inch port sectional valve spares range for 50 LPM systems
• Install tip: clean bore ; lightly lubricate seals ; verify spool end float after rebuild
• Result: restores smooth lever or solenoid actuation and reduces leakage to atmosphere

Key Features

• Compatibility: Hydra Part HP-20C Group 2 gear pumps including common 1.8 taper variants
• Intended use: replacement of front shaft seal and static seals during pump service
• Typical kit contents: shaft lip seal ; body o rings and gaskets as required for Group 2 pumps
• Reference performance: many Group 2 pumps in range rated up to 250 bar continuous service
• Application: agricultural PTO pumps ; mobile hydraulics ; general industrial systems
• Service note: inspect shaft journal and bushings ; replace if wear marks exceed spec

Key Features

• Compatibility: GR55M; GR46/68M; GR46/69M; GR465/68M rotators
• Contents: O-rings; quad rings; shaft seals; backups
• Function: restores sealing of swivel and main shaft assemblies
• Material: OEM spec elastomers for hydraulic oil service
• Use: stop external leaks and recover pressure integrity

Key Features

• Part: quad ring seal for CPR8 adapter plate interface
• Use: replaces sealing ring between rotator and plate
• Compatibility: CPR8; CPR8-01 variants
• Material: OEM spec elastomer for hydraulic oil
• Install: light oil film; avoid twisting the ring

Key Features

• Scope: seal kit for heavy DB rotators (104/105/110)
• Use: service swivel and main shaft seals
• Compatibility: GR104DB; GR105DB; GR110-1DB; GR110-2DB
• Contents: OEM matched sealing elements
• Note: check orientation of lip seals during assembly

Key Features

• Scope: seal pack for double bearing GR12S and GR16S
• Use: overhaul bearing housing and swivel seals
• Typical torque: per datasheet; replace all dynamic seals
• Includes: O-rings; quad-rings; shaft/seal carriers
• Models: GR12S; GR16S

Key Features

• Scope: service seals for GR60 and GR603 families
• Models covered: GR60; GR60DB; GR60/69; GR603; GR603-2
• Use: rebuild swivel/rotary seals; stop external leaks
• Contents: model-specific O-rings; shaft seals; backups
• Note: verify port threads G 1/2 and install per manual

Key Features

• Scope: service seal kit dedicated to GR55FF
• Includes: O-rings; quad-rings; shaft seal; gaskets
• Use: restore sealing of rotator and swivel
• Compatibility: GR55FF flat-top variant
• Packaging: manufacturer matched components

Key Features

• Scope: complete seal set for GR46 family variants
• Includes: O-rings; shaft seals; back-ups; quad rings
• Use: overhaul swivel and rotary seals on service
• Compatibility: GR46; GR46A; GR463; GR465
• Note: follow datasheet for assembly torques and oil

Key Features

• Compatibility: Baltrotors rotators GR30 ; GR30A ; GR30PF family
• Rotator type: Grapple rotator with eye upper connection and axle lower mount ; unlimited rotation
• Intended use: service kit for original seals used in GR30 series rotator heads
• Typical kit contents: rotary housing ; shaft and port sealing elements needed for leak repair
• Applications: forestry and small agricultural cranes using GR30 family rotators
• Fitment note: verify exact GR30 variant before installation to match geometry

Key Features

• Compatibility: Hydra Part cylinder series 201 ; 301 ; 401 ; 501
• Bore sizes: 25 ; 30 ; 35 ; 40/50 mm options in one kit family
• Intended use: reseal of small bore cylinders within listed series to restore function
• Typical kit contents: piston ; rod ; wiper seals with static o rings used in cylinder rebuilds
• Applications: compact hydraulic rams on implements ; compact plant ; attachments
• Selection note: match cylinder series and bore at time of order to ensure fit

Key Features

• Compatibility: Hydra Part cylinder series 200 ; 300 ; 400 ; 500
• Bore sizes: 20 ; 25 ; 30/32 ; 40 mm
• Intended use: reseal kit for small bore standard cylinders used on compact equipment
• Typical kit contents: piston ; rod ; wiper seals and static rings typically supplied for rebuild
• Applications: small actuators on trailers ; clamps ; light duty machinery
• Selection note: use bore size and series number to choose correct kit option

Key Features

• Compatibility: Hydra Part cylinder series 204 ; 304 ; 404 ; 504 ; 592
• Bore sizes: 40 ; 50 ; 63 ; 70/80 mm
• Intended use: reseal kit for mid size cylinders across the listed series
• Typical kit contents: piston ; rod ; wiper seals with associated o rings typical to service kits
• Applications: ag implements ; compact construction machines ; materials handling rams
• Fitment check: match series code on cylinder plate to ensure correct family selection

Key Features

• Compatibility: Hydra Part cylinder series 203 ; 303 ; 403 ; 503
• Bore sizes: 30 ; 40 ; 50 ; 60/70 mm range options
• Intended use: complete reseal kit for the listed cylinder families
• Typical kit contents: seals for piston ; rod ; and wiper plus static rings as used in cylinder rebuild
• Applications: compact loaders ; attachments ; light industrial rams within these series
• Selection note: confirm series and bore from cylinder ID to match the correct kit option

Key Features

• Compatibility: Hydra Part standard cylinders ; bores 35 ; 40 ; 50 ; 60/70 mm
• Intended use: reseal kit to address external leaks ; internal bypass and poor cylinder holding
• Typical kit contents: piston seal ; rod seal ; wiper ; static seals as typically included in kits
• Applications: light plant ; agricultural implements ; compact handling equipment
• Sizing note: measure bore and rod to ensure correct option under the 35 ; 60/70 set
• Install tip: use appropriate assembly sleeves to avoid cutting PTFE or elastomer lips

Key Features

• Compatibility: Hydra Part standard double acting cylinders ; bores 30 ; 40 ; 50 ; 60/70 ; 80 mm
• Intended use: routine reseal kit for compact and mid size standard cylinders
• Typical kit contents: dynamic piston and rod seals ; wiper and static sealing elements typical for rebuild
• Applications: compact machinery ; auxiliary rams ; attachments
• Fitment check: verify bore and rod combo to select the correct sub option within the range
• Service note: install with clean fluid and avoid sharp edges to protect sealing lips