Key Features

• Type: rigid industrial rotator (CPR series piston motor)
• Capacity class: 14 t nominal application class
• Rotation: continuous hydraulic rotation
• Interface: flat body for rigid mounting
• Use: poly-grapples; sorting grabs and high torque tools

Key Features

• Type: rigid industrial rotator variant (-01)
• Capacity class: 14 t nominal application class
• Ports: hose outlets in -01 configuration (series standard)
• Rotation: continuous; axial boxer-type piston motor
• Use: heavy duty industrial grapples

Key Features

• Type: rigid industrial rotator (CPR15 family)
• Torque at 25 MPa: ~4500 Nm (manufacturer data)
• Recommended oil flow: ~35 l/min
• Operating machine: up to ~21 t rigid mount; ~29 t link mount
• Use: high capacity sorting; demolition and industrial tools

Key Features

• Type: rigid industrial rotator variant with side hose outlets
• Torque at 25 MPa: ~4500 Nm (CPR15 family)
• Recommended oil flow: ~35 l/min
• Mounting: flat body for rigid or link mounting
• Use: heavy industrial grapples requiring high torque

Key Features

• Type: rigid industrial rotator (CPR15-03)
• Hydraulic ports: inlet from top; outlet side or bottom
• Max axial load static: ~150 kN class
• Torque at 25 MPa: ~4500 Nm; max ~40 kNm lock
• Recommended oil flow: ~35 l/min

Key Features

• Type: rigid industrial rotator
• Capacity: 5 tonne class
• Ports: hose outlets through the side
• Design: compact radial piston motor with high positioning accuracy
• Use: poly-grapples; sorting grabs and tools

Key Features

• Type: rigid industrial rotator variant
• Design: compact body for flat mounting
• Use: industrial grapples; sorting grabs
• Note: -01 variant configuration per Baltrotors spec
• Support: data sheet available from manufacturer

Key Features

• Type: rigid industrial rotator
• Capacity: 8 tonne class
• Ports: grapple connections through the base
• Design: axial boxer-type piston motor for high torque
• Use: poly-grapples; sorting grabs; high capacity tools

Key Features

• Type: rigid industrial rotator variant
• Capacity: 8 tonne class
• Ports: grapple connections through the side
• Use: applications needing side-port plumbing
• Support: data sheet available from manufacturer

Key Features

• Type: rigid industrial rotator
• Capacity: 9 tonne class
• Ports: grapple connections through the base
• Performance: torque around 3000 Nm at 25 MPa (manufacturer data)
• Use: heavy-duty sorting and demolition grapples

Key Features

• Type: rigid industrial rotator variant
• Capacity: 9 tonne class
• Ports: variant with side-port hose connections
• Performance: 30 rpm max rotation; relief valves fitted (series)
• Use: rigid mount industrial grapples

Key Features

• Type: adaptor plate for CPR15 family
• Pattern: CPR15 bolt and pilot geometry
• Material: precision machined steel
• Use: rigid mounting to industrial grapples
• Service: check gasket/O-ring groove and surface finish

Key Features

• Type: base adaptor plate for CPR8 with 3/4" porting
• Function: mates rotator to grapple/tool frame
• Material: machined steel with locating pilot
• Pattern: CPR8 bolt circle
• Note: verify gasket and fastener torque

Key Features

• Type: adaptor plate for CPR9-04ST rotators
• Pattern: CPR9 bolt circle and pilot register
• Use: mounts flat-body CPR rotator to grapple frame
• Material: machined steel with countersunk/through holes
• Note: verify fastener grade and torque

Key Features

• Frame: Robust Hardox 450 / Strenx 700 structure
• 360° rotation: Continuous hydraulic rotation (reinforced motor)
• Rotation control: Adjustable rotation speed
• Blades: Reversible cutting blades for longer service life
• aw guidance: Double-guide mobile jaw for stable alignment
• Wear protection: Anti-wear plate on the fixed jaw front
• Speed valve: Faster working cycles / improved productivity

Key Features

• Application: cutting european rail ; tram tracks
• Rotation: 360° continuous hydraulic
• Frame: strenx 700; mobile jaw hytaf
• Blades: reversible ; turnable
• Operating pressure: ≈260 bar typical
• Carrier: 20-35 t excavators

Key Features

• Compatibility: Hydra Part standard double acting cylinders ; bores 30 ; 40 ; 50 ; 60/70 ; 80 mm
• Intended use: routine reseal kit for compact and mid size standard cylinders
• Typical kit contents: dynamic piston and rod seals ; wiper and static sealing elements typical for rebuild
• Applications: compact machinery ; auxiliary rams ; attachments
• Fitment check: verify bore and rod combo to select the correct sub option within the range
• Service note: install with clean fluid and avoid sharp edges to protect sealing lips

Key Features

• Compatibility: Hydra Part standard cylinders ; bores 35 ; 40 ; 50 ; 60/70 mm
• Intended use: reseal kit to address external leaks ; internal bypass and poor cylinder holding
• Typical kit contents: piston seal ; rod seal ; wiper ; static seals as typically included in kits
• Applications: light plant ; agricultural implements ; compact handling equipment
• Sizing note: measure bore and rod to ensure correct option under the 35 ; 60/70 set
• Install tip: use appropriate assembly sleeves to avoid cutting PTFE or elastomer lips

Key Features

• Compatibility: Hydra Part cylinder series 205 ; 305 ; 405 ; 505 ; 593 ; 612 ; 632 ; 642 ; 651
• Bore sizes: 40 ; 50 ; 63 ; 70 ; 80/90 mm
• Intended use: service kit for resealing listed series cylinders to prevent leakage and drift
• Typical kit contents: rod seal ; piston seal ; wiper ; backup rings and o rings as required
• Applications: mobile hydraulic cylinders across ag ; municipal and light construction machinery
• Selection note: match series and bore markings to ensure compatibility across the variant list

Key Features

• Compatibility: Hydra Part standard double acting cylinders ; bores 45 ; 80/90 mm
• Intended use: rebuild and reseal standard cylinders to restore pressure integrity and stop external leakage
• Typical kit contents: piston ; rod ; buffer and wiper seals plus associated o rings for cylinder service
• Applications: general mobile hydraulics ; loaders ; attachments ; ag and industrial equipment
• Maintenance note: verify bore ; rod ; and series before ordering to match correct seal sizes
• Fluid compatibility: formulated for use with mineral hydraulic oils common to mobile machinery

Key Features

• Compatibility: Hydra Part cylinder series 206 ; 306 ; 406 ; 506
• Bore sizes: 50 ; 63 ; 70 ; 80/90 ; 100 mm range
• Intended use: resealing of medium bore cylinders in the specified series to recover performance
• Typical kit contents: piston ; rod ; wiper and related static seals typical to cylinder service kits
• Applications: suitable for rams on trailers ; loaders ; compact equipment within these series
• Fitment check: use the series code stamped on the cylinder to select the correct kit

Key Features

• Compatibility: Hydra Part cylinder series 200 ; 300 ; 400 ; 500
• Bore sizes: 20 ; 25 ; 30/32 ; 40 mm
• Intended use: reseal kit for small bore standard cylinders used on compact equipment
• Typical kit contents: piston ; rod ; wiper seals and static rings typically supplied for rebuild
• Applications: small actuators on trailers ; clamps ; light duty machinery
• Selection note: use bore size and series number to choose correct kit option

Key Features

• Compatibility: Hydra Part cylinder series 201 ; 301 ; 401 ; 501
• Bore sizes: 25 ; 30 ; 35 ; 40/50 mm options in one kit family
• Intended use: reseal of small bore cylinders within listed series to restore function
• Typical kit contents: piston ; rod ; wiper seals with static o rings used in cylinder rebuilds
• Applications: compact hydraulic rams on implements ; compact plant ; attachments
• Selection note: match cylinder series and bore at time of order to ensure fit

Key Features

• Compatibility: Hydra Part cylinder series 203 ; 303 ; 403 ; 503
• Bore sizes: 30 ; 40 ; 50 ; 60/70 mm range options
• Intended use: complete reseal kit for the listed cylinder families
• Typical kit contents: seals for piston ; rod ; and wiper plus static rings as used in cylinder rebuild
• Applications: compact loaders ; attachments ; light industrial rams within these series
• Selection note: confirm series and bore from cylinder ID to match the correct kit option