Key Features

• Seal type: spring-energized ptfe variseal
• Motor sizes: 8 cc ; 11 cc ; 16 cc gear motors
• Typical shaft size: 18 mm id for group 2 motors
• Mates with: 18x30 back-up washer
• Use: low-friction sealing for continuous-duty flail motors

Key Features

• Compatibility: GR55M; GR46/68M; GR46/69M; GR465/68M rotators
• Contents: O-rings; quad rings; shaft seals; backups
• Function: restores sealing of swivel and main shaft assemblies
• Material: OEM spec elastomers for hydraulic oil service
• Use: stop external leaks and recover pressure integrity

Key Features

• Compatibility: Hydra Part MSY series disc valve orbital motors ; Zi pattern
• Motor notes: MSY motors use disc valve distribution offering higher torque capability in family
• Intended use: seal replacement for output shaft ; cover and porting to resolve leaks
• Typical kit contents: shaft seal ; housing o rings ; drain port seals commonly replaced on service
• Applications: industrial and mobile drives requiring rugged low speed high torque performance
• Selection note: check MSY displacement code and mounting to select correct kit

Key Features

• Compatibility: Hydra Part sectional control valves nominal 50 L/min class ; one spool section
• Intended use: repack a single working section to cure external leaks and spool drag
• Typical kit contents: spool o rings ; end cap seals ; dust seals used on 50L sections
• Valve family: 3/8 inch port sectional valve spares range for 50 LPM systems
• Install tip: clean bore ; lightly lubricate seals ; verify spool end float after rebuild
• Result: restores smooth lever or solenoid actuation and reduces leakage to atmosphere

Key Features

• Compatibility: Hydra Part HP-20C Group 2 gear pumps including common 1.8 taper variants
• Intended use: replacement of front shaft seal and static seals during pump service
• Typical kit contents: shaft lip seal ; body o rings and gaskets as required for Group 2 pumps
• Reference performance: many Group 2 pumps in range rated up to 250 bar continuous service
• Application: agricultural PTO pumps ; mobile hydraulics ; general industrial systems
• Service note: inspect shaft journal and bushings ; replace if wear marks exceed spec

Key Features

• Compatibility: Baltrotors rotators GR30 ; GR30A ; GR30PF family
• Rotator type: Grapple rotator with eye upper connection and axle lower mount ; unlimited rotation
• Intended use: service kit for original seals used in GR30 series rotator heads
• Typical kit contents: rotary housing ; shaft and port sealing elements needed for leak repair
• Applications: forestry and small agricultural cranes using GR30 family rotators
• Fitment note: verify exact GR30 variant before installation to match geometry

Key Features

• Compatibility: Hydra Part cylinder series 203 ; 303 ; 403 ; 503
• Bore sizes: 30 ; 40 ; 50 ; 60/70 mm range options
• Intended use: complete reseal kit for the listed cylinder families
• Typical kit contents: seals for piston ; rod ; and wiper plus static rings as used in cylinder rebuild
• Applications: compact loaders ; attachments ; light industrial rams within these series
• Selection note: confirm series and bore from cylinder ID to match the correct kit option

Key Features

• Seal type: ptfe variseal for km 30 motor
• Function: shaft sealing under fluctuating pressure
• Typical media: hydraulic oil ; water-glycol
• Install: use with matching back-up ring
• Note: confirm shaft diameter ; groove spec before order

Key Features

• Compatibility: DAP8040 pattern cylinder used on CEL cylinder models only
• Bore x rod class: 80 x 40 mm nominal geometry per 8040 designation
• Intended use: complete reseal to address external leaks ; bypass and drift
• Typical kit contents: piston seal ; rod seal ; wiper ; and static seals commonly used
• Applications: general purpose rams on attachments and agricultural machinery
• Fitment note: verify CEL cylinder label before ordering to ensure correct kit series

Key Features

• Compatibility: Hydra Part MR high torque orbital motors ; Zi pattern
• Intended use: seal replacement for motor front end and housing to stop oil leakage
• Typical kit contents: shaft seal ; housing o rings ; drain and port seals typical for MR motors
• Applications: industrial and mobile hydraulic drives across compact machinery
• Service note: check case drain port condition ; replace washers if distorted
• Selection note: use motor nameplate to match the correct MR kit variant

Key Features

• Compatibility: Hydra Part MT orbital motors ; Zi pattern
• Intended use: renew shaft ; cover and case seals to correct oil leaks and pressure loss
• Typical kit contents: output shaft seal ; body o rings ; port and drain seals used on MT motors
• Applications: low speed high torque drives on conveyors ; wheel motors ; winches
• Service note: inspect shaft for wear ; replace if grooved to protect new seal
• Fitment check: confirm MT model code and mounting to select correct kit

Key Features

• Compatibility: Hydra Part MV high torque orbital motors ; Zi pattern
• Intended use: renew housing ; shaft and cover seals to prevent oil leakage and pressure loss
• Typical kit contents: shaft seal ; case drain and port seals ; body o rings used on MV motors
• Applications: drive motors on conveyors ; winches ; swing drives and attachments
• Service note: inspect shaft surface finish ; replace or sleeve if worn to protect new seal
• Fitment check: confirm MV motor code on nameplate to match kit version

Key Features

• Type: OEM rotator seal kit
• Compatibility: model stated in title
• Contents: rod seals ; piston seals ; O rings ; wear rings
• Media: mineral hydraulic oil service
• Use: restore leak tightness and rotational performance

Key Features

• Type: OEM cylinder seal kit
• Compatibility: model stated in title
• Contents: rod seal ; piston seal ; gland wiper ; O rings
• Benefit: improved holding and reduced external leakage
• Use: maintenance overhaul of cylinders

Key Features

• Use case: Replacement seal set for maintenance of swivel/rotary joint
• Notes: Specification information is limited in source listing; confirm dimensions and compatibility before purchase
• Notes: Details not stated
• Notes: Details not stated
• Notes: Details not stated

Key Features

• Type: OEM cylinder seal kit
• Compatibility: model stated in title
• Contents: rod seal ; piston seal ; gland wiper ; O rings
• Benefit: improved holding and reduced external leakage
• Use: maintenance overhaul of cylinders

Key Features

• Type: OEM rotator seal kit
• Compatibility: model stated in title
• Contents: rod seals ; piston seals ; O rings ; wear rings
• Media: mineral hydraulic oil service
• Use: restore leak tightness and rotational performance

Key Features

• Type: OEM cylinder seal kit
• Compatibility: model stated in title
• Contents: rod seal ; piston seal ; gland wiper ; O rings
• Benefit: improved holding and reduced external leakage
• Use: maintenance overhaul of cylinders

Key Features

• Type: OEM cylinder seal kit
• Compatibility: model stated in title
• Contents: rod seal ; piston seal ; gland wiper ; O rings
• Benefit: improved holding and reduced external leakage
• Use: maintenance overhaul of cylinders

Key Features

• Type: OEM cylinder seal kit
• Compatibility: model stated in title
• Contents: rod seal ; piston seal ; gland wiper ; O rings
• Benefit: improved holding and reduced external leakage
• Use: maintenance overhaul of cylinders

Key Features

• Type: OEM cylinder seal kit
• Compatibility: model stated in title
• Contents: rod seal ; piston seal ; gland wiper ; O rings
• Benefit: improved holding and reduced external leakage
• Use: maintenance overhaul of cylinders

Key Features

• Type: OEM cylinder seal kit
• Compatibility: model stated in title
• Contents: rod seal ; piston seal ; gland wiper ; O rings
• Benefit: improved holding and reduced external leakage
• Use: maintenance overhaul of cylinders

Key Features

• Type: OEM cylinder seal kit
• Compatibility: model stated in title
• Contents: rod seal ; piston seal ; gland wiper ; O rings
• Benefit: improved holding and reduced external leakage
• Use: maintenance overhaul of cylinders

Key Features

• Type: OEM cylinder seal kit
• Compatibility: model stated in title
• Contents: rod seal ; piston seal ; gland wiper ; O rings
• Benefit: improved holding and reduced external leakage
• Use: maintenance overhaul of cylinders