Key Features

• Thread size: G 3/8 BSPP
• Setting range: 10 to 180 bar adjustable
• Max flow: 35 l.min ; 45 l.min variants
• Max pressure: 350 bar
• Construction: zinc plated steel body ; hardened internal parts
• Seals: NBR Buna N standard
• Function: dual cross line relief with crossed tank
• Typical use: motor or cylinder shock protection with independent port settings

Key Features

• Body style: M18 threaded barrel flush mount
• Sensing range: 8 mm nominal
• Supply voltage: 10 to 30 vdc
• Output options: 2 wire dc ; PNP ; NPN ; NO ; NC variants
• Ingress protection: IP65 ; IP66 ; IP67 ; IP68 ; IP69K
• Switching frequency: 400 Hz typical
• Operating temperature: -40 to +85 degC
• Connection: M12 A coded connector ; 2 m PUR cable variants
• Standard: IEC 60947-5-2 inductive proximity

Key Features

• Series: FRD17 replacement element
• Diameter: 93 mm nominal element OD
• Filtration rating: 25 µm nominal media grade
• Intended use: particulate removal in hydraulic oil to protect components
• Applications: return ; suction or low pressure filter housings sized for FRD17 elements
• Service note: monitor differential pressure and change when indicator shows restriction

Key Features

• Function: seals the interface between hydraulic filter housing and cover to prevent leaks
• Compatibility: for Hydra Part filter housing family reference CCJUN type
• Intended use: gasket replacement during element changes or service
• Applications: tank return ; pressure or suction filter assemblies
• Service note: replace at each element change to maintain seal integrity
• Material note: select elastomer compatible with system oil and temperature

Key Features

• Type: tank top return ; air breather element
• Length: 152 mm
• Filtration: 25 µm nominal
• Use: hydraulic reservoir breathing ; return filtration
• Compatibility: frd ; similar housings

Key Features

• Standard: DIN 15481
• Size: ST4;8 x 25
• Type: thread-forming screw for metal
• Head: pan/countersunk style (per variant)
• Use: securing covers; guards; light-duty components

Key Features

• Model: PADCAGE-PADLOCK-20MM
• Purpose: locking pad for stabiliser pad storage cage systems
• Security level: moderate site security
• Use: secures cage door during storage and transport
• Material: hardened shackle with compact body

Key Features

• Component: motor cover for MR motor 32 mm shaft conversion
• Function: protects front seal area and bearing alignment
• Use: fitted during conversion to 32 mm shaft
• Benefit: clean finish and debris protection
• Compatibility: MR series housings

Key Features

• Displacement: 15 cc/rev
• Group: group 2 external gear motor
• Mount: 4 bolt european
• Shaft: 1.8 taper keyed
• Ports: inlet/outlet 3/4" bspp ; case drain 1/4" bspp
• Working pressure: 250 bar class
• Rotation: reversible cw ; ccw
• Use: winch ; conveyor ; flail head drive

Key Features

• Kit: pneumatic actuation for sectional control valves
• Compatibility: 80 l ; 90 l ; 100 l ; 120 l ; 150 l control valves
• Supply: compressed air 6 ; 10 bar typical
• Contents: cylinders ; brackets ; hoses ; fittings
• Use: remote spool operation from cab or pendant

Key Features

• Diameter: 40 mm
• Thread: m10 stud
• Stud length: 30 mm
• Grip: round knob; ribbed edge
• Material: thermoplastic knob; steel stud
• Use: panel; lever; valve actuation handle

Key Features

• Pump series: Group 2 gear pump
• Displacement: 14 cc.rev
• Rotation: clockwise
• Shaft: 9 tooth spline SAE J498 9T 16.32 DP
• Ports: BSP threaded
• Pressure class: up to 250–270 bar depending on model

Key Features

• Section: 80 LPM 1/2" working section
• Spool: float spool 5BY-13NZL style
• Neutral: spring centered ; 4th detent for float
• Ports: A.B 1/2" BSP ; P.T 3/4" BSP typical for 80 L
• Use: loader boom function ; road planers ; snow ploughs

Key Features

• Ports: 3/4" BSPP inline
• Flow: 80 l.min
• Adjustment range: 100–350 bar
• Function: direct acting relief ; protects downstream circuits
• Construction: zinc plated steel body ; hardened internals

Key Features

• Ports: 3/4" BSPP
• Type: solenoid operated poppet check valve
• State: normally closed in both directions
• Flow rating: 80–120 l.min class
• Max pressure: 315–350 bar
• Connector: DIN 43650 Form A coil interface

Key Features

• Type: differential poppet pressure relief valve VMPP
• Ports: 3/8" BSPP P ; T
• Setting range: 100–250 bar adjustable
• Nominal flow variants: 20 l.min ; 50 l.min options
• Leakage: guided poppet ; negligible leakage
• Materials: zinc plated steel body ; hardened internals

Key Features

• Machine class: 4–8 t excavators
• Tilt angle: ±45 deg ; 90 deg total
• Output torque: 7000 N.m
• Drive type: sealed rotary actuator
• Intended use: precision grading ; ditching ; backfilling

Key Features

• Machine class: 8–12 t excavators
• Tilt angle: ±45 deg ; 90 deg total
• Output torque: 9000 N.m
• Drive type: sealed rotary actuator
• Hydraulics: suitable for two line control ; check flow ; pressure per datasheet
• Use: grading ; battering ; trenching without repositioning machine

Key Features

• Tilt range: 134 degree total tilt arc
• Rated torque: 15000 N m output torque class
• Carrier class: suits 12 ; 16 ton excavators
• Use case: tilting of buckets and tools for grading ; trenching and access works
• Integration: compact rotary actuator package ready to mount to appropriate hitch
• Notes: select correct mount and hydraulics to suit carrier aux circuit

Key Features

• Spool function: motor spool geometry with A ; B open to tank in neutral for freewheeling
• Valve family: fits 50 LPM AK electric or lever operated sectional valve body
• Purpose: minimise cavitation risk and allow smooth motor rundown at neutral
• Use case: hydraulic motors on conveyors ; augers ; winches
• Service note: check section seals and end caps during spool replacement
• Selection: confirm 50L AK body type before ordering

Key Features

• Functions: 8 on ; off pushbuttons
• Supply: 12 ; 24 VDC receiver
• Harness: 2.4 m prewired receiver connection
• Use case: multiple discrete outputs for valve coils or contactor logic
• Applications: hydraulic attachment control where simple binary commands are required
• Note: choose e stop variant where a safety interlock is mandated

Key Features

• Functions: 4 on ; off pushbuttons
• Supply: 12 ; 24 VDC receiver
• Harness: 2.4 m prewired receiver lead
• Use case: simple on ; off control of one or two double acting functions
• Form factor: handheld transmitter with compact receiver
• Applications: tippers ; winches ; auxiliary hydraulic functions

Key Features

• Functions: 8 on ; off pushbuttons with dedicated emergency stop
• Supply: 12 ; 24 VDC receiver input
• Harness: prewired receiver cable 2.4 m for quick install
• Use case: discrete control of solenoid valves ; contactors or relays on mobile plant
• Integration: suited to retrofit of simple hydraulic controls with radio link
• Safety: e stop provides immediate stop signal to system interlock

Key Features

• Functions: 12 on ; off pushbuttons plus dedicated emergency stop
• Supply: 12 ; 24 VDC receiver input prewired with 2.4 m cable
• Use case: retrofit on ; off control of hydraulic valves or contactor logic
• Form factor: handheld transmitter with paired receiver for mobile machinery
• Safety: E stop provides immediate shutdown signal to system interlock
• Frequency: industrial license free bands with robust interference mitigation