Key Features

• Type: differential poppet pressure relief valve VMPP
• Ports: 3/8" BSPP P ; T
• Setting range: 100–250 bar adjustable
• Nominal flow variants: 20 l.min ; 50 l.min options
• Leakage: guided poppet ; negligible leakage
• Materials: zinc plated steel body ; hardened internals

Key Features

• Machine class: 4–8 t excavators
• Tilt angle: ±45 deg ; 90 deg total
• Output torque: 7000 N.m
• Drive type: sealed rotary actuator
• Intended use: precision grading ; ditching ; backfilling

Key Features

• Machine class: 8–12 t excavators
• Tilt angle: ±45 deg ; 90 deg total
• Output torque: 9000 N.m
• Drive type: sealed rotary actuator
• Hydraulics: suitable for two line control ; check flow ; pressure per datasheet
• Use: grading ; battering ; trenching without repositioning machine

Key Features

• Tilt range: 134 degree total tilt arc
• Rated torque: 15000 N m output torque class
• Carrier class: suits 12 ; 16 ton excavators
• Use case: tilting of buckets and tools for grading ; trenching and access works
• Integration: compact rotary actuator package ready to mount to appropriate hitch
• Notes: select correct mount and hydraulics to suit carrier aux circuit

Key Features

• Spool function: motor spool geometry with A ; B open to tank in neutral for freewheeling
• Valve family: fits 50 LPM AK electric or lever operated sectional valve body
• Purpose: minimise cavitation risk and allow smooth motor rundown at neutral
• Use case: hydraulic motors on conveyors ; augers ; winches
• Service note: check section seals and end caps during spool replacement
• Selection: confirm 50L AK body type before ordering

Key Features

• Functions: 8 on ; off pushbuttons
• Supply: 12 ; 24 VDC receiver
• Harness: 2.4 m prewired receiver connection
• Use case: multiple discrete outputs for valve coils or contactor logic
• Applications: hydraulic attachment control where simple binary commands are required
• Note: choose e stop variant where a safety interlock is mandated

Key Features

• Functions: 4 on ; off pushbuttons
• Supply: 12 ; 24 VDC receiver
• Harness: 2.4 m prewired receiver lead
• Use case: simple on ; off control of one or two double acting functions
• Form factor: handheld transmitter with compact receiver
• Applications: tippers ; winches ; auxiliary hydraulic functions

Key Features

• Functions: 8 on ; off pushbuttons with dedicated emergency stop
• Supply: 12 ; 24 VDC receiver input
• Harness: prewired receiver cable 2.4 m for quick install
• Use case: discrete control of solenoid valves ; contactors or relays on mobile plant
• Integration: suited to retrofit of simple hydraulic controls with radio link
• Safety: e stop provides immediate stop signal to system interlock

Key Features

• Functions: 12 on ; off pushbuttons plus dedicated emergency stop
• Supply: 12 ; 24 VDC receiver input prewired with 2.4 m cable
• Use case: retrofit on ; off control of hydraulic valves or contactor logic
• Form factor: handheld transmitter with paired receiver for mobile machinery
• Safety: E stop provides immediate shutdown signal to system interlock
• Frequency: industrial license free bands with robust interference mitigation

Key Features

• Gear ratio: 3 ; 1 speed increase
• Power rating: 20 kW
• Input coupling: female quick coupling PTO 1 3/8 inch 6 spline standard
• Pump interface: supplied with Group 3 gear pump for higher displacement
• Recommended limits: keep gearbox output below 3000 rpm per common PTO gearbox guidance
• Construction: aluminium gearbox for low mass on 3 point link implements

Key Features

• Gear ratio: 3 ; 1 step up for pump speed
• Power rating: 20 kW maximum
• Input/output: 540 rpm PTO nominal to ~1620 rpm output ; observe 3000 rpm max output guidance
• Shafts: male PTO 1 3/8 inch 6 spline interface
• Pump interface: supplied with Group 3 gear pump for higher flow demand
• Construction: lightweight aluminium gearbox for agricultural PTO duty

Key Features

• Compatibility: DAP8040 pattern cylinder used on CEL cylinder models only
• Bore x rod class: 80 x 40 mm nominal geometry per 8040 designation
• Intended use: complete reseal to address external leaks ; bypass and drift
• Typical kit contents: piston seal ; rod seal ; wiper ; and static seals commonly used
• Applications: general purpose rams on attachments and agricultural machinery
• Fitment note: verify CEL cylinder label before ordering to ensure correct kit series

Key Features

• Compatibility: Hydra Part MR high torque orbital motors ; Zi pattern
• Intended use: seal replacement for motor front end and housing to stop oil leakage
• Typical kit contents: shaft seal ; housing o rings ; drain and port seals typical for MR motors
• Applications: industrial and mobile hydraulic drives across compact machinery
• Service note: check case drain port condition ; replace washers if distorted
• Selection note: use motor nameplate to match the correct MR kit variant

Key Features

• Compatibility: Hydra Part MT orbital motors ; Zi pattern
• Intended use: renew shaft ; cover and case seals to correct oil leaks and pressure loss
• Typical kit contents: output shaft seal ; body o rings ; port and drain seals used on MT motors
• Applications: low speed high torque drives on conveyors ; wheel motors ; winches
• Service note: inspect shaft for wear ; replace if grooved to protect new seal
• Fitment check: confirm MT model code and mounting to select correct kit

Key Features

• Compatibility: Hydra Part MSY series disc valve orbital motors ; Zi pattern
• Motor notes: MSY motors use disc valve distribution offering higher torque capability in family
• Intended use: seal replacement for output shaft ; cover and porting to resolve leaks
• Typical kit contents: shaft seal ; housing o rings ; drain port seals commonly replaced on service
• Applications: industrial and mobile drives requiring rugged low speed high torque performance
• Selection note: check MSY displacement code and mounting to select correct kit

Key Features

• Compatibility: Hydra Part MV high torque orbital motors ; Zi pattern
• Intended use: renew housing ; shaft and cover seals to prevent oil leakage and pressure loss
• Typical kit contents: shaft seal ; case drain and port seals ; body o rings used on MV motors
• Applications: drive motors on conveyors ; winches ; swing drives and attachments
• Service note: inspect shaft surface finish ; replace or sleeve if worn to protect new seal
• Fitment check: confirm MV motor code on nameplate to match kit version

Key Features

• Compatibility: Hydra Part HP-30C Group 3 aluminium gear pumps
• Intended use: service kit for shaft and static seals on Group 3 pump body
• Typical kit contents: front lip seal ; cover o rings and body seals for Group 3 construction
• Reference performance: Group 3 pumps in range typically used at higher flows and pressures
• Applications: PTO driven systems ; industrial power units requiring larger displacements
• Fitment check: confirm HP-30C family before ordering to ensure correct diameters

Key Features

• Compatibility: Hydra Part Group 2 tandem pumps using front code 067 ; rear code 066 interfaces
• Intended use: renew the sealing set when splitting tandem sections or replacing shaft seal
• Typical kit contents: shaft seal ; o rings ; interface seals used between tandem pump sections
• Notes on assembly: ensure rear shaft selection matches torque from front section during build
• Applications: tandem pumps on tippers ; loaders ; auxiliary hydraulic circuits
• Variant note: front 067 ; rear 066 code covers common Group 2 tandem configurations

Key Features

• Compatibility: Hydra Part HP-10C Group 1 gear pumps
• Intended use: renew shaft and static seals during Group 1 pump overhaul
• Typical kit contents: front shaft oil seal ; body o rings ; gasket elements for Group 1 casing
• Pump family: light duty aluminium gear pumps used widely on compact hydraulics
• Service note: check for shaft play ; replace bearings if excessive to protect new seal
• Applications: power packs ; small mobile circuits ; low to mid power implements

Key Features

• Compatibility: Hydra Part cylinder series 201 ; 301 ; 401 ; 501
• Bore sizes: 25 ; 30 ; 35 ; 40/50 mm options in one kit family
• Intended use: reseal of small bore cylinders within listed series to restore function
• Typical kit contents: piston ; rod ; wiper seals with static o rings used in cylinder rebuilds
• Applications: compact hydraulic rams on implements ; compact plant ; attachments
• Selection note: match cylinder series and bore at time of order to ensure fit

Key Features

• Compatibility: Hydra Part cylinder series 200 ; 300 ; 400 ; 500
• Bore sizes: 20 ; 25 ; 30/32 ; 40 mm
• Intended use: reseal kit for small bore standard cylinders used on compact equipment
• Typical kit contents: piston ; rod ; wiper seals and static rings typically supplied for rebuild
• Applications: small actuators on trailers ; clamps ; light duty machinery
• Selection note: use bore size and series number to choose correct kit option

Key Features

• Compatibility: Hydra Part cylinder series 204 ; 304 ; 404 ; 504 ; 592
• Bore sizes: 40 ; 50 ; 63 ; 70/80 mm
• Intended use: reseal kit for mid size cylinders across the listed series
• Typical kit contents: piston ; rod ; wiper seals with associated o rings typical to service kits
• Applications: ag implements ; compact construction machines ; materials handling rams
• Fitment check: match series code on cylinder plate to ensure correct family selection

Key Features

• Compatibility: Hydra Part standard cylinders ; bores 35 ; 40 ; 50 ; 60/70 mm
• Intended use: reseal kit to address external leaks ; internal bypass and poor cylinder holding
• Typical kit contents: piston seal ; rod seal ; wiper ; static seals as typically included in kits
• Applications: light plant ; agricultural implements ; compact handling equipment
• Sizing note: measure bore and rod to ensure correct option under the 35 ; 60/70 set
• Install tip: use appropriate assembly sleeves to avoid cutting PTFE or elastomer lips

Key Features

• Compatibility: Hydra Part standard double acting cylinders ; bores 30 ; 40 ; 50 ; 60/70 ; 80 mm
• Intended use: routine reseal kit for compact and mid size standard cylinders
• Typical kit contents: dynamic piston and rod seals ; wiper and static sealing elements typical for rebuild
• Applications: compact machinery ; auxiliary rams ; attachments
• Fitment check: verify bore and rod combo to select the correct sub option within the range
• Service note: install with clean fluid and avoid sharp edges to protect sealing lips